The scope and characteristics of the pipe clamp system

     1. Application range of pipe clamps: Light series pipe clamps are used for ordinary mechanical pressure pipes of 6 sizes series, the outer diameter of the pipe is 6-57mm. Duplex series pipe clamps are used for mechanical pressure pipes of 5 sizes series, the outer diameter of the pipe is 6-42mm. The heavy-duty series of pipe clamps are used in 8 series of high mechanical pressure pipes, with an outer diameter of 8-273mm.
     2. Pipe clamp material characteristics: density, bending strength, impact toughness, compression strength, elastic modulus, tensile strength, temperature resistance, color
     3. Pipe clamp installation procedure: Before assembling on the welding plate, in order to better determine the direction of the clamp, it is recommended to mark the fixing place first, then weld on the welding, insert the lower half of the pipe clamp body, and put it on The pipe to be fixed. Then put the other half of the pipe clamp body and cover plate, and tighten them with screws. Never directly weld the bottom plate with the pipe clamp installed. On the ground rail, the rail can be welded to the foundation or fixed with screws. Then push the rail nut into the rail and turn it 90 degrees, insert the lower half of the pipe clamp body into the nut, put the pipe to be fixed, and then put it The upper half of the pipe clamp body and the cover plate are fixed with screws. Fold up assembly, the guide rail can be welded on the foundation, or fixed with screws, first install the upper and lower half of the pipe clamp body, put the pipe to be fixed, and then put the upper half of the pipe clamp body, fixed with screws, through the anti-loosening cover plate Prevent it from turning. Then install the second pipe clamp in the same way as above. Assembling the elbow, when assembling the elbow, it should be directly fixed with Yongsheng pipe clamps at the front and rear of the elbow. It is recommended that such a support point should be a fixed position.

The Hose Clamp System produced by our company is made of 201/304 grade stainless steel，Used to connect and fasten all kinds of pipelines, automobile manufacturing and other industries